
No. 1
Heat pump repair
Olympia winters stay wet and just above freezing for weeks, so defrost does a lot of work. We read the coil sensor, the defrost board and the charge before anything else.
Go to the service page
South Sound service area
Our map follows the freeway from DuPont down through Lacey, Olympia and Tumwater, then fans out across Thurston County to Yelm, Rainier, Tenino and Rochester. The office builds each day around that shape, so a cul-de-sac by the interchange and a gravel lane in the valley both get a realistic arrival window.
Quick answer
Larch HVAC & Appliance covers ten South Sound communities: Lacey, Olympia, Tumwater, Hawks Prairie, DuPont and Steilacoom along the Interstate 5 corridor, plus Yelm, Rainier, Tenino and Rochester out on the county roads. Visits are grouped by direction, so nearby addresses share a route. Reserve a day and window on our booking page, or call us any day from 8 AM until 7 PM; a call back from the office locks in your visit.
Ten communities across Thurston County and the edge of Pierce County. Here they are with their ZIP codes and the kind of housing our technicians meet in each:
By direction of travel first. Interstate 5 is the spine: DuPont and Steilacoom sit at the north end past the Nisqually delta, Hawks Prairie and Lacey come next, and Olympia and Tumwater run together along the freeway to the south. Yelm lies off to the southeast in the Nisqually Valley, Rainier and Tenino to the south, and Rochester to the southwest, each reached by county roads rather than the interstate. The office groups addresses that share a direction, so one truck can work a run of Olympia and Tumwater homes in the morning or a loop through Yelm and Rainier without doubling back.
That is why you choose a window of arrival rather than a set minute. A repair that runs long at one stop pushes the next, and freeway traffic on Interstate 5 shifts through the day. The office confirms your window by phone, and the technician rings you after wrapping up the previous job. On rural property, a note in your booking about gates, dogs, a long gravel driveway or which building holds the equipment saves real minutes once the truck pulls in.
Each tab carries a photo from our service work and the first checks we make on that job. Choose a tab, or let them change by themselves.

No. 1
Olympia winters stay wet and just above freezing for weeks, so defrost does a lot of work. We read the coil sensor, the defrost board and the charge before anything else.
Go to the service page
No. 2
Cooling was an afterthought in many South Sound homes until the 2021 heat dome. When a newer system lags on a hot day, airflow, the capacitor and the charge come first.
Go to the service page
No. 3
Gas or electric, a furnace that quits on a cold morning is traced step by step: thermostat call, inducer, pressure switch, igniter, flame sensor, limit.
Go to the service page
No. 4
A new system starts with a load calculation and a dry, level pad. Prairie gravel drains fast; in low clay corners we set the unit higher.
Go to the service page
No. 5
Ductless heads suit older Olympia houses with no space for ducts. The line set runs outside, so its insulation and the condensate drain get a close look.
Go to the service page
No. 6
Spring and fall visits clear needles and moss from the coil, open the drain holes in the base and test the defrost cycle before the long gray season.
Go to the service page
No. 7
Warm shelves usually come from frost on the coil, a fan that has stopped or a failed defrost part. Sealed-system repairs happen at home, by technicians holding EPA 608 Universal credentials.
Go to the service page
No. 8
Rural wells around Yelm and Rochester carry sediment that clogs inlet screens. A slow fill or a musty front-loader boot is where most washer visits start.
Go to the service page
No. 9
Damp air and long vent runs make lint pile up fast in South Sound laundry rooms. The vent is tested together with the element or burner and the thermal fuse.
Go to the service page
No. 10
Cloudy glasses and a tub that will not drain point to the filter, the drain pump or a hose without its loop under the counter. Each gets checked in order.
Go to the service page
No. 11
Bake and broil elements, igniters and the oven sensor are metered before any part is ordered, on gas, electric and induction models alike.
Go to the service page
No. 12
When the ice stops after a power outage, the fill tube has often frozen. We check the water valve, the filter and the tube before blaming the ice maker.
Go to the service pageYes, and in patterns we plan for. Private and small community wells around Rochester, Tenino, Rainier and the Yelm outskirts carry sediment, iron and minerals into the fine screens of washer inlet valves, dishwasher fill valves and refrigerator water valves sooner than town water does. Older houses in South Capitol, Steilacoom, Beachcrest and the DuPont Village Historic District often hide ducts and furnaces in damp crawlspaces or basements, and many have heat pumps or mini-splits fitted long after construction, which brings airflow and static pressure problems. Inside a Rochester manufactured home, the furnace or air handler usually lives in a narrow closet, with ducts running beneath the floor.
Newer builds tell a different story. In Hawks Prairie, Northwest Landing and Yelm's subdivisions, the heat pumps, furnaces and appliances that came with the house are reaching the age when capacitors, igniters, drain pumps and door boots give out, and two-story plans bring hot upstairs rooms and second-floor laundry leaks. Long moves add their own damage: washers shipped without transit bolts, refrigerators laid on their sides, stacked laundry pairs separated and rejoined. Wherever your address falls, claim a slot on the booking calendar or phone us during calling hours, 8 AM until 7 PM; either way, the office checks that your road is covered.
Yes. All three are on our map: Rochester in the rural southwest, Rainier and Tenino in south Thurston County. The office groups those addresses on routes that head south on the county roads, so your arrival window matches that day's plan. Jot down any gate, dog or long driveway as you book, which spares the technician a hunt for the equipment.
In Thurston County: Lacey 98503, 98509, 98513 and 98516 (which includes Hawks Prairie), Olympia 98501, 98502, 98506 and 98512, Tumwater 98501 and 98512, Yelm 98597, Rainier 98576, Tenino 98589 and Rochester 98579. In Pierce County: DuPont 98327 and Steilacoom 98388. Live a little beyond these codes? Phone first, and the office will say whether a visit works.
Because each technician works a string of nearby homes, and both repair length and I-5 traffic move the schedule around. The window leaves room for a job that runs over without leaving you in the dark. The office confirms it with a call ahead of the visit, and the technician phones once heading toward you, so the truck's arrival is never a surprise.
Ready when you are
Use the online form to claim a date and window, or phone the office and ask whether your road falls inside our map. Prefer Spanish? Ask, and the office answers in Spanish.
Online booking
Tell us what is acting up and when suits you. A coordinator phones to confirm the slot, and your technician calls again when heading your way.
These registrations are open to anyone. Look the numbers up on L&I Verify, and see our licenses page for what each one covers.
Read what each license allows